These devices are designed to be used with an inflatable butt plug and a hummingbird magic wand attachment, which can be purchased alongside all Edge-o-Matic kits. The vibrator is designed to accept any standard magic wand attachment, so you are free to experiment with your favorite means of stimulation.

Depending on the model, sensitivity and response time can be calibrated to provide an early cutoff or late, resulting in a perfect ruined orgasm machine for sadists or a controlled, prolonged edging session.

The Edge-o-Matic 3000 has a built-in display and remote web interface which can be used to control the toy, including adjust sensitivity, vibration speeds, and allow an orgasm on the next spike. Future product plans include ability to link multiple units together to create a synchronized play session with multiple users.

The Edge-o-Matic is a perfect device for orgasm denial enthusiasts, bondage aficionados, robo-sex connoisseurs, and those who want all the pleasure of someone else in control without having to find that someone else.

Want to join in on the fun? Buy yours today!

Introducing the Edge-o-Matic 3000!

Formerly known as the NoGasm Wi-Fi, this is the smarter evolution of the NoGasm. For a complete tour of the product inside and out, check out the manual, downloaded in PDF form: click here.

You’re about to experience a toy that knows when you’re about to orgasm.

By attaching to your inflatable butt plug (you remembered to buy one, no?) and reading changes in pressure, this device detects pelvic floor contractions which happen just before and during orgasm in most people. By summing the magnitude and frequency of these contractions, orgasm can be detected and prevented. A frustrating solo session awaits.

I’ve heard of this before!

The Edge-o-Matic 3000™ is the next evolution of the open-source NoGasm V1, adding wireless networking, electronic sensor calibration, a host of new UI features and configuration options, session recording, and more! In keeping with the spirit of this project’s origins, resources for this device remain open-source.

Does it support…?

This device was designed with future expansion in mind, and features multiple connectivity options for other toys. Request your favorite toy and Maus-Tec may create an adapter! Software updates are provided from Maus-Tec to bring you the latest features and ever-evolving orgasm detection improvement, and they’re super easy to install.

Get to Know the Edge-o-Matic

Edge-o-Matic Base Unit: This device performs calculations on incoming pressure signals from the plug and uses that to control the vibrator. All the brains live here.

Vibrator: This is a simple vibrator designed to work with most Hitachi Magic Wand accessories. It is commonly used with a Hummingbird masturbator attachment, which is available under "Edge-o-Matic Accessories" here: Humming Bird.

Butt Plug Connector: This is an airline that splices into your choice of butt plug (available under "Edge-o-Matic Acessories" here: Plug). The airline connects to the base Edge-o-Matic and is used to sample pressure from the butt plug.

Operation:

Once a butt plug is selected and spliced onto the airline, the airline is attached to the base unit. The vibrator is also connected to the base unit, and the device is powered on. Insert and partially inflate the butt plug to a comfortable level, and adjust prescaling sensitivity (see unit instructions for details).

At this point, pelvic floor contractions will be detected by the base unit and you should see a readout on the display. When in Automatic mode, the vibrator will automatically ramp up until a series of contractions is detected, at which point the vibrator is cut off and the user is denied orgasm.

Technical:

The device senses pressure on the range of 0-100KPa. The pressure inside the butt plug rarely exceeds 20-30KPa and is amplified using an analog prescaler. On the Edge-o-Matic 3000, this prescaler can be digitally adjusted to allow for a wide range of input pressures.

The magnitude of each pressure spike caused by pelvic floor contraction is determined by the sensitivity of the prescaler. For this reason, a comfortable mid-pressure inflation level on the plug is recommended. Zero to One pump should be sufficient. 

Accessory Interoperability:

The included vibrator does not have a means to function independently, however the Edge-o-Matic 3000 has a manual control mode. The Edge-o-Matic 3000 can also be remotely controlled via Serial interface or Websocket API.

There are several additional accessories we wish to produce and prototypes are being made for connecting wall-powered Hitachi vibrators and other stroking devices. 

The Edge-o-Matic 3000 includes an accessory port (NOT AN ETHERNET JACK), which can be used by hardware developers to create any number of accessories, be it sex toy dongles or remote displays.

At present we have completed one Maus-Tec approved accessory to work with the Edge-o-Matic 3000 and the Venus 2000 milking machine. Please welcome the Mercury 1000! 

Compatibility as a sending device with the ever-growing Buttplug framework has been developed as well, which allows the Edge-o-Matic device to control a larger number of Teledildonics devices. Compatibility with xToys has been completed as well as native bluetooth with certain brand name vibrating toys!